Seeley International can not accurately calculate gas, water and or power consumption as any calculation must be based on individual requirements and conditions. The factors that determine the [...]
Refer to the home owner’s manual for your specific model at our owner’s manual page and follow the instructions.
Check the time AM or PM is set correctly. Check the sleep or away programmed temperature as it may be too high, if so lower the temperature. If you have tried the above and your heater is still [...]
If your heater is new (less than 12 months old), contact your installer to discuss the system design and operation. If your heater is older than 12 months, increase the SET temperature. Check [...]
Check that there are enough outlets opened for the fan speed you have selected. Check that the return air filter is not blocked.We recommend cleaning every fortnight. If you have tried the above [...]
The heater may have gone through a start-up sequence and not lit. Check that the power and gas are turned on. Read the home owner’s manual for your specific model at our owner’s [...]
Yes. The Braemar Spectrolink Multizone controller can be linked with Australia’s most popular brands of evaporative air conditioners – post 2001 Braemar, Breezair and Coolair models – and this [...]
The new Spectrolink Multizone system is available as an option on all four and five-star models.
Yes, you can. A master controller operates all zones and is usually located in the main living area. This can be used to remotely switch the heating on or off in other zones as required.
Yes! The Spectrolink Controller allows you to automatically turn zones on and off up to four time daily, so you can pre warm the home for your arrival and regulate the temperature while you [...]
Yes! The Braemar Spectrolink Multizone Controller allows you to set different temperatures in up to four designated zones within the house. Simply discuss which rooms can be included in each [...]
